Why does a goods train sometimes move backwards briefly before starting to move ahead from a stop?

Latest News

विभिन्न खंडों में नॉन इंटरलॉकिंग कार्य के कारण कुछ ट्रेनें प्रभावित

View All >>

1 Rail News

विभिन्न खंडों में नॉन इंटरलॉकिंग कार्य के कारण कुछ ट्रेनें प्रभावित

view all>>

2 Railway Employee

Vacancy Notification of Manager Guest Service (MGS)-Staff Welfare, Level-7

view all>>

3 Always Important

जानिए पटरियों के साइड में क्यों लिखे होते हैं नंबर?

view all>>

Why does a goods train sometimes move backwards briefly before starting to move ahead from a stop?

July 18, 2019, 1:41 PM

There are a few different reasons that this happens. One reason (and the official one stated in working timetables) has to do with ensuring the couplers (CBC’s) along the rake are all engaged and locked before starting off. The backward push forces the couplers to engage if they are loose, not fully engaged, or if the coupler pins had been inadvertently (or maliciously) lifted while the train was stopped.

Another reason is to compress the couplers along the length of the rake, so that when the loco starts moving forward, it has an easier time setting the wagons at the front in motion first before the rear wagons as the slack in the couplers plays out along the length of the rake — it doesn’t have to set the entire train in motion all at once. This is more important with poor track conditions where the loco cannot develope its full tractive effort before its wheels slips, or with older style bearings on the wagons which have much higher starting friction than the rolling friction encountered when on the move. Bad or older designs of bearings can also stick or bind and increase the starting resistance.

A third reason for the backward push is to release brakes where the blocks have stuck to the wheel treads (brake binding); once released by the backward push, there is no further resistance to forward motion. This was more of a problem in the vacuum brake days with poorly maintained brakes. Lastly, in the age before walkie-talkies, the backward push was a way to inform the guard at the rear end that the train was about to set off — with really long rakes and noisy environments, horn signals might not always work.

Source – IFRCA.org

Railway Employee (App)

Rail News Center ( App)

Railway Question Bank ( App)

Railway Mutual Transfer

(App)

Information Center ( App)

Disclaimer: The Information /News /Video provided in this Platform has been collected from different sources. We Believe that “Knowledge Is Power” and our aim is to create general awareness among people and make them powerful through easily accessible Information. NOTE: We do not take any responsibility of authenticity of Information/News/Videos.

This entry was posted in 2 Railway Employee, STUDY NEW, Railway Employee