When did the first train run in India?

Latest News

General Manager’s Safety Award for 10 Staff of Central Railway

View All >>

1 Rail News

क्षेत्रीय हिंदी प्रतियोगिता 2023 संपन्न

Central Railway Revolutionizes LHB Power Car Testing with Static Water Load Testing Units in a First of its kind Innovation
Shri Ram Karan Yadav takes over as General Manager, Central Railway
भारतीय रेल ने नवंबर 2023 तक 1015.6 एमटी माल लदान का लक्ष्य हासिल किया
जबलपुर-हजरत निजामुद्दीन एक्सप्रेस सहित 10 ट्रेन निरस्त, कामायनी एक्सप्रेस परिवर्तित मार्ग से चलेगी
रेलवे की बड़ी सौगात! अब इन स्‍टेशनों से पटना के लिए मिलेगी सीधी ट्रेन, जानें शेड्यूल
किसानों के बाद अब पूर्व सैनिकों ने घेरा रेलवे ट्रैक, One Rank One Pension की मांग को लेकर शुरू किया प्रदर्शन
रेलवे स्टेशन के फुट ओवरब्रिज पर ले सकेंगे स्ट्रीट फूड का आनंद

view all>>

2 Railway Employee

General Manager’s Safety Award for 10 Staff of Central Railway

view all>>

3 Always Important

जानिए पटरियों के साइड में क्यों लिखे होते हैं नंबर?

view all>>

When did the first train run in India?

June 25, 2019, 11:34 AM

The customary answer to this question is 3:35pm on April 16th, 1853, when a train with 14 railway carriages and 400 guests left Bombay‘s Bori Bunder for Thane, with a 21-gun salute. It was hauled by three locomotives: Sindh, Sultan, and Sahib. The journey took an hour and fifteen minutes.

That, however, was just the first commercial passenger service in India. In fact, a few other railways are known to have operated in India prior to 1853, for hauling materials.

In 1835, a short experimental line was laid near Chintadripet. This appears to have been a practice run of sorts for the Red Hill Railroad line. Construction on this line began in 1836. This line was intended for the carriage of granite stone. It was opened in 1837, and while it had teething troubles, it appears that it was definitely in operation in 1837, with a written report of its running from January 1838. While primarily intended for rail wagons hauled by animals, locomotives were also used on the line. One of them may even have been built in India. More here.

In 1845, a railway was built for carriage of stone and construction materials for irrigation works and a dam over the Godavari near Rajahmundry. More here.

ये भी पढ़े – क्या किशमिश को पानी में भिगोकर खाना ज्यादा फायदेमंद होता है?

Perhaps best known of these early pre-1853 railways is the account of a steam locomotive, Thomason, which had been used for hauling construction material in Roorkee for the Solani viaduct in 1851 (it is said to have begun working there on 22nd December 1851). The Solani viaduct construction was a part of the Ganges Canal project, started in 1845. The viaduct had 15 arches and spanned the 4km-wide Solani valley (about 145km north-east of New Delhi). Earth for the approach embankments was transported along light rail lines about 5 to 10 km long from Piran Kaliyar to Roorkee. Standard gauge wagons were used, built from parts brought over from England, and hauled by men and later horses. In late 1851, the locomotive Thomason (named for the engineer on the project) was assembled on the spot from parts transported from Calcutta. It hauled two wagons at a time, at a speed of about 6km/h. It did not last very long, and after about 9 months India’s first steam locomotive died a spectacular death with a boiler explosion, reportedly to the delight of the construction workers who had viewed it more as a hindrance than help. Hughes’ book states that this was a six-wheeled tank engine, probably a 2-2-2WT built by E. B. Wilson, and of standard gauge. Some details of the wagons and the use of the locomotive are in Sir Proby T Cautley’s Report on the Ganges Canal Works (3 volumes, 1860).

It is entirely possible that there were other such railways used for the conveyance of materials and construction supplies in India around this time.

Moving past these construction railways, the next locomotive to arrive in India was the Falkland (named for a governor of Bombay), used by the contractors of the GIPR for shunting operations on the first line out of Bombay that was being built. It began work on February 23, 1852. Hughes’ book suggests that this was also built by E. B. Wilson, and was probably a four-wheeled tank engine (0-4-0T?) with dummy crankshaft. It later became GIPR loco #9. A third locomotive, Vulcan, is said to have been used by the GIPR for material hauling and shunting duties in 1852 as well.

There were also eight more locos from Vulcan Foundry imported by GIPR in 1852 and 1853.

On November 18, 1852, a locomotive hauled some coaches on a trial run from Bori Bunder to Thana. This probably counts as the first “real” train to run in India.

Source – IFRCA.org

Railway Employee (App)

Rail News Center ( App)

Railway Question Bank ( App)

Railway Mutual Transfer

(App)

Information Center ( App)

Disclaimer: The Information /News /Video provided in this Platform has been collected from different sources. We Believe that “Knowledge Is Power” and our aim is to create general awareness among people and make them powerful through easily accessible Information. NOTE: We do not take any responsibility of authenticity of Information/News/Videos.

This entry was posted in 2 Railway Employee, STUDY NEW, Railway Employee